Required Tools and Supplies
- Safety Glasses
- Nitrile Gloves
- Shop Rags
- 8mm Socket
- Torque Wrench
For more information on tools, read Tools and Fasteners Guide.
Always wear safety glasses and nitrile gloves when servicing your Polaris RANGER. To inspect or replace the drive belt on your RANGER 570 Mid-Size or RANGER CREW 570-4, follow these steps:
1. Ensure the vehicle is on a flat, level surface.
2. Ensure the vehicle is in PARK.
3. Lift the cargo box.
4. Using an 8mm socket, remove the eight fasteners securing the outer clutch cover to the vehicle.
5. Tilt the clutch cover back and carefully remove it from the rear of the vehicle.
6. Inspect the clutch cover seal and replace if needed. The seal is part number 5521831.
7. Note the drive belt direction of rotation so it can be installed in the same direction.
8. Squeeze the belt in the center to spread the clutch sheaves.
9. Carefully walk the belt off the driven clutch and remove from the drive clutch.
10. Inspect the belt for any fraying, hour-glassing, loose cords, missing cogs, abrasions, burns or damage and replace if needed.
11. Clean out the inside of the clutch covers thoroughly. Warning: Failure to remove ALL debris when replacing the belt could result in vehicle damage, loss of control and severe injury or death.
12. When reinstalling the belt, ensure the belt is installed in the same direction of travel. If replacing the belt, install so that the part number on the belt is facing outward.
13. Loop the belt over the drive clutch and begin to walk it over the driven clutch sheave.
14. Spin the driven clutch five to seven times to help seat the belt.
15. Carefully reinstall the clutch cover, ensuring the cover seal is fully seated.
16. Install the eight clutch cover fasteners. Torque to 54 in-lbs (6 Nm).
17. Lower the cargo box.
For more information, see your authorized Polaris Dealer. Find a dealer near you with the Dealer Locator.
More maintenance tips, procedures and specifications can be found in your Owner's Manual.
To find diagrams and replacement part numbers, use the online parts catalog.
Unless noted, trademarks are the property of Polaris Industries Inc.
© 2022 Polaris Industries Inc.