Skip to content Skip to navigation Skip to footer
POLARIS GOVERNMENT & DEFENSE
HELP CENTER
02/05/2024

RANGER Replacement Keys

For some RANGER vehicles, Polaris offers key blanks that can be cut using an existing key. If both keys have been lost, you will need to replace the ignition. Contact your Polaris Dealer for key and ignition replacement assistance. Reference the information below when contacting them. 

For model year 2021 and newer RANGER models, 2018-2020 RANGER 1000/CREW 1000, 2017-2020 RANGER XP 1000, 2017/2019-2020 RANGER CREW XP 1000, and 2016 RANGER CREW XP 900, use the following key blanks and key covers. Note that keys with non-removable covers cannot be copied onto key blanks. See your Polaris Dealer for more information.

  • The key blank is part number 4080125. 
  • The cover for this key is part number 5458344. 

For models not listed above, RANGER vehicles and the youth RANGER 150 have a four-digit code on the original key, as shown below. Model year 2010 RANGER EV uses the same key. To identify which series the key is, compare the key to the chart below. For 4000 series blanks, reference all four digits stamped on the original key. 

Image of spare key

 Series Part Number
 20__ 4010278
 21__ 4010278
 22__ 4010321
 23__ 4010321
 27__ 4010321
 28__ 4010321
 31__ 4110141
 32__ 4110148
 67__ 4010278
 68__ 4010278
 4000-4149 4015704
 4150-4299 4015705


The Polaris Key Cover for these keys is part number 5433534. 

key cover

If both keys have been misplaced, you must replace the ignition. See an authorized Polaris Dealer for assistance. 

RANGER EV Keys
Model 2011 and newer RANGER EV models use keys with a right-hand groove or left-hand groove. Groove is determined when holding the key, ready to put into the ignition.

  • If your key has a groove on the right-hand side, use key blank 0453143.
  • If your key has a groove on the left-hand side, use key blank 0453372. Polaris only offers key blanks that can be cut using an existing key. These key blanks will need to be cut to match an original key. If both keys have been lost, you will need to replace the ignition.

Series 99 RANGER 6x6
These models use a square-style key. The square-style keys are identified by one or more dots on the key. The dots correspond to letter codes, the last digit of the part number. The ignition switch body will also have a letter code on the underside if the keys are not available.

Ranger 6 by 6 key

Dots Part Number
 1 Dot 5410611-A
 2 Dots 5410611-B
 3 Dots 5410611-C
 4 Dots 5410611-D
 5 Dots 5410611-E


Replacement Door Keys
If you need a replacement door key, please see your authorized Polaris Dealer. Your dealer will need to know your doors' handle style: Flat Latch Handle (including NorthStar models) or Push-Button Door Handle.

For more information, see your authorized Polaris Dealer. To find a dealer near you, use the Dealer Locator.
Maintenance tips, procedures and specifications can be found in your Owner's Manual.
To find diagrams and replacement part numbers, use the online parts catalog.

Unless noted, trademarks are the property of Polaris Industries Inc.
© 2022 Polaris Industries Inc.

Keyword(s) key , replacement , spare , duplicate , ignition ,